16OZ UV DTF WRAP DESIGN 25

16oz UV DTF Wraps – Perfect for Glass Cans & Tumblers!

(16oz size is designed to fit standard glass cans and similar drinkware.)

✨ How to Apply UV DTF Wraps

You don’t need a heat press for UV DTF — these are stick-and-peel application.

Application Instructions

1. Ensure the glass is clean and dry
   (wipe with isopropyl alcohol for best results).

2. Carefully peel the backing off the wrap.

3. Line up the design to your cup or glass.

4. Press the wrap down firmly, starting in the centre and smoothing outward.

5. Use a scraper, squeegee, or your fingers to remove any air bubbles.

6. Slowly peel the carrier film away, keeping the design on the glass.

7. Press down one more time firmly around the entire design.

✨ Aftercare & Washing Instructions

• Hand wash only.
• Do not soak.
• Do not scrub directly over the design.
• No dishwasher or high heat.
• Do not microwave.
• Avoid dropping or rough handling.

Extra Tips

• If you need to reposition, do it before pressing fully.
• Remove creases or bubbles by smoothing from the middle outwards.
• Works on most smooth surfaces: glass, stainless steel, acrylic, plastic.