20cm DTF – Great for Kids Clothing!

Perfect for T-shirts, hoodies, bodysuits, pyjamas and more. Crisp colours, soft feel, and long-lasting durability.

✨ How to Apply DTF Heat Transfers

You will need:
• A heat press (recommended) or home iron
• Parchment paper / baking paper
• A clean, dry garment (100% cotton, polycotton, polyester, etc.)

Heat Press Method (Best Results)

Pre-press garment for 5 seconds to remove moisture and wrinkles.
Place the DTF transfer face-up (design facing YOU) with the adhesive side down onto the garment.
Press at 150–160°C (300–320°F) for 12–15 seconds with medium pressure.
Allow to cool completely (cold peel).
Peel film slowly from one corner.
Re-press with parchment paper for 5–8 seconds to lock in the design.

Iron Method (If you don’t have a heat press)

Set iron to cotton/high heat, no steam.
Place garment on a hard, flat surface.
Lay the transfer down and cover with baking paper.
Press firmly, holding the iron in place for 15–20 seconds per section (don’t slide).
Let cool completely, then peel.
Cover again with baking paper and iron for 5–10 seconds to finish.

✨ Washing Instructions

To keep your DTF prints looking amazing:

• Wait 24–48 hours before first wash.
• Cold or warm wash only (up to 40°C).
• Turn garment inside out every wash.
• Do not bleach.
• Do not tumble dry (or use low heat if needed).
• Do not iron directly on the print.
• Avoid harsh detergents or fabric softeners.