30cm DTF – Great for Adults Clothing!
Ideal for T-shirts, hoodies, sweaters, tote bags and more. Large, vibrant, long-lasting prints with a soft, flexible feel.
✨ How to Apply DTF Heat Transfers
You will need:
• A heat press (recommended) or home iron
• Parchment/baking paper
• A clean, dry garment (cotton, polycotton, polyester, etc.)
Heat Press Method (Best Results)
-
Pre-press garment for 5 seconds to remove moisture and smooth fabric.
-
Position the DTF transfer face-up (design facing you) with the adhesive side down.
-
Press at 150–160°C (300–320°F) for 12–15 seconds using medium pressure.
-
Allow to cool completely (cold peel).
-
Peel the film slowly from one corner.
-
Re-press with parchment paper for 5–8 seconds to secure the design.
Iron Method (If no heat press)
-
Set iron to cotton/high heat, no steam.
-
Place garment on a hard, flat surface.
-
Place the transfer down and cover with baking paper.
-
Press down firmly for 15–20 seconds per section (do not slide the iron).
-
Let cool completely, then peel the film.
-
Cover again with baking paper and iron for 5–10 seconds to finish.
✨ Washing Instructions
To keep your DTF print vibrant and long-lasting:
• Wait 24–48 hours before first wash.
• Wash inside out, cold or warm (up to 40°C).
• Do not bleach.
• Do not tumble dry (or use low heat if necessary).
• Do not iron directly on the print.
• Avoid fabric softeners or harsh detergents.
