10cm DTF Heat Transfers
Add a pop of creativity with our premium 10cm DTF (Direct-to-Film) heat transfers — perfect for smaller projects like kids’ clothing, pockets, tote bags, or accents. Each transfer is roughly 10cm, but please note that sizing may vary slightly. Our transfers arrive ready to press, delivering vibrant, long-lasting prints on a variety of fabrics.
How to Apply – With a Heat Press:
-
Preheat your garment for a few seconds to remove moisture.
-
Place transfer in your desired position (design side down).
-
Press at 150–160°C (300–320°F) for 15–20 seconds with medium pressure.
-
Allow to cool, then peel film away slowly.
-
Press again for 5–10 seconds (with parchment or a Teflon sheet) for best durability.
How to Apply – With an Iron:
-
Set iron to high/cotton (no steam).
-
Place garment on a flat, hard surface.
-
Position transfer (design side down) and cover with parchment paper or a pressing cloth.
-
Press firmly for 15–20 seconds in each section, applying even pressure.
-
Let cool, peel carefully, and give one more press for 5–10 seconds.
Washing Instructions:
-
Turn garment inside out before washing.
-
Wash on a cold, gentle cycle.
-
Avoid bleach or harsh detergents.
-
Hang dry or tumble dry on low heat.
-
Do not iron directly over the design.
✨ All DTF transfers are sent with a printed “How to Apply” instruction sheet to make the process stress-free — perfect for both beginners and experienced crafters.
