30cm DTF Heat Transfers
Bring your designs to life with our premium 30cm DTF (Direct-to-Film) heat transfers — perfect for personal or professional projects. Each transfer is roughly 30cm, but please note that sizing may vary slightly. Our transfers arrive ready to press, delivering vibrant, durable prints on a variety of fabrics.
How to Apply – With a Heat Press:
-
Preheat your garment for a few seconds to remove moisture.
-
Place transfer in your desired position (design side down).
-
Press at 150–160°C (300–320°F) for 15–20 seconds with medium pressure.
-
Allow to cool, then peel film away slowly.
-
Press again for 5–10 seconds (with parchment or a Teflon sheet) for best durability.
How to Apply – With an Iron:
-
Set iron to high/cotton (no steam).
-
Place garment on a flat, hard surface.
-
Position transfer (design side down) and cover with parchment paper or a pressing cloth.
-
Press firmly for 15–20 seconds in each section, applying even pressure.
-
Let cool, peel carefully, and give one more press for 5–10 seconds.
Washing Instructions:
-
Turn garment inside out before washing.
-
Wash on a cold, gentle cycle.
-
Avoid bleach or harsh detergents.
-
Hang dry or tumble dry on low heat.
-
Do not iron directly over the design.
✨ All DTF transfers are sent with a printed “How to Apply” instruction sheet to make the process stress-free — perfect for both beginners and experienced crafters.
