8-10CM POCKET SIZE DTF
Ideal for smaller projects like on pockets , leather note books , small bags etc. vibrant, long-lasting prints with a soft, flexible feel.
✨ How to Apply DTF Heat Transfers
You will need:
• A heat press (recommended) or home iron
• Parchment/baking paper
• A clean, dry garment (cotton, polycotton, polyester, etc.)
Using a Heat Press
Temperature: 165°C / 330°F
Time: 15 seconds
Pressure: Medium
Application Steps
-
Place the transfer face up on the garment (design side up, film on top).
-
Cover with parchment paper or a Teflon sheet.
-
Press for 15 seconds using medium pressure.
Cold Peel Instructions
-
Allow the transfer to cool completely to room temperature.
-
Peel the film slowly once fully cooled.
-
Cover again with parchment paper and press for an additional 5–10 seconds to finish and seal.
Using a Home Iron (No Steam)
Setting: High heat (cotton/linen setting)
Steam: OFF
Application Steps
-
Place the transfer face up on the fabric.
-
Cover with parchment paper.
-
Press firmly in sections for 20–25 seconds per area.
Do not slide the iron. Lift and press each section.
Peel Options
Cold Peel (Recommended)
4. Allow the design to cool completely, then peel the film slowly.
Hot Peel Option
4. Allow the design to cool slightly.
5. Peel the film once cooled enough to handle.
6. Re-cover with parchment paper and press again for 10–15 seconds to seal the design.
Tips for Best Results
-
Use medium to firm pressure.
-
Make sure the garment is wrinkle-free before pressing.
-
If any edges lift, cover and press again for 5–10 seconds.
-
Wait 24 hours before washing.
-
Wash inside out in cold water and tumble dry low.